•  
Kategoriler
Markalar
Tümünü Göster
E-Bülten Aboneliği
E-posta:
Başa Dön / TEST VE ÖLÇÜ ALETLERİ / FLUKE TEST VE ÖLÇÜ ALETLERİ / Aksesuarlar / Akım Pensleri / AC/DC Akım Pensleri / Fluke i310s AC/DC Akım Pensi
Resim Fluke i310s AC/DC Akım Pensi

Fluke i310s AC/DC Akım Pensi


The i310s current probe is based on Hall Effect technology for use in measurement of both DC and AC current.
Tedarikçi: FLUKE
Bookmark and Share

The i310s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

  • Current Ranges: 30 A and 300 A ACRMS or ±45 A and 450 A DC
  • Measuring Ranges: ±45 A and 450 A dc
  • Output Sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A)
  • Resolution: ±50 mA (40 A) to ±100 mA (400 A)
  • Load Impedance: > 10 k Ohms and £ 100 pF
  • Frequency Range (small signal): DC to 20 kHz (- 3 dB)
  • Phase Shift below 1 kHz, < 2 degrees
  • Temperature Coefficient: ±0.1% of reading / °C
  • Power Supply: 9 V Alkaline

 

Electrical Characteristics
Current Ranges
  30 A and 300 A ACRMS or ±45 A and 450 A DC
ACRMS or DC
  ±45 A and 450 A
Inrush Current
  600A ACRMS MAX
Output Sensitivity
  10 mV/A (30 A)
  1 mV/A (300 A)
Accuracy (at +23°C)
(30A range) ±1% of reading ±50 mA
(300A range) ±1% of reading ±300 mA
Bandwidth to meet accuracy specification
  1 kHz
Phase Shift below 1 kHz
  < 2 degrees
Resolution
  ±50 mA (30 A)
  ±100 mA (300 A)
Load Impedance
  > 10 k Ohms and ≤100 pF
Conductor Position Sensitivity
  ±1.5% relative to centre reading
Frequency Range
(small signal) DC to 20 kHz (- 3 dB)
Temperature Coefficient
  ±0.1% of reading / °C
Power Supply
  9 V Alkaline, MN1604/PP3
Battery Life
  30 Hours, low battery indicator
Working Voltage (see Safety Standards section)
  300 V ACRMS or DC

 

General Characteristics
Maximum Conductor Size
  19 mm diameter
Output Connection
  Safety BNC connector
  Supplied with safety 4mm adaptor
Output Zero
  Manual adjust via thumbwheel
Cable Length
  2 metres
Operating Temperature Range
  -10 to +50 °C
Storage Temperature Range (with battery removed)
  -20 to +85 °C
Operating Humidity
  15% to 85% (non-condensing)
Weight
  250 g

 

Safety Standards
BS EN 61010-1
  2001
BS EN 61010-2-032
  2002
BS EN 61010-031
  2002
300 VRMS, Category III, Pollution Degree 2
   
Note
  Use of the probe on un-insulated conductors is limited to 300 V ACRMS or DC and frequencies below 1 kHz.
EMC Standards
BS EN 61236 1998 +A1, A2, & A3

 

Model Name Description
i310s AC/DC CURRENT CLAMP


Derecelendirme 0,00. Toplam oy 0.
 
E-Ticaret: AloraNET
Ana Sayfa | Yeni Ürünler | Arama | Hesabım | İletişim
Telif Hakkı © 2024 Aremsis. Tüm hakları saklıdır.