E-Bülten Aboneliği
E-posta:

Fluke i30s AC/DC Akım Pensi


The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.
Tedarikçi: FLUKE
Bookmark and Share

The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

 

Electrical specifications
Specified current range
  30 mA to 30A dc, 30 mA to 20 A ac rms
Usable current range
  5 mA to 30 A dc, 30 mA to 20 A ac rms
Crest Factor
  1.4"
Output sensitivity
  100 mV/A
Accuracy (at +25 °C)
  ± 1 % of reading ± 2 mA
Resolution
  ± 1 mA
Load impedance
  > 100 kΩ
Conductor position sensitivity
  ± 1 % relative to center reading
Frequency range
  DC to 100 kHz (- 0.5 dB)
Phase shift below 1 kHz
  < 2 degrees
Temperature coefficient
  ± 0.01 % of reading/°C
Power supply
  9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)
  300 V ac rms or dc

 

General specifications
Maximum conductor size
  19 mm diameter
Output connection
  Safety BNC connector, supplied with safety 4 mm adapter
Output zero
  Manual adjust via thumbwheel
Cable length
  2 meters
Operating temperature range
  0 °C to +50 °C
Storage temperature range (with battery removed)
  -20 °C to +85 °C
Operating humidity
  15 % to 85 % (non-condensing)
Weight
  250 g
Safety standards
  BS EN 61010-1: 2001
  BS EN 61010-2-032: 2002
  BS EN 61010-031: 2002
  300 Vrms, Category III, Pollution Degree 2
  Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequencies below 1 kHz.
EMC Standards
  EN 61326: 1998 +A1, A2, & A3

 

Model Description
i30s AC/DC Current Clamp


Derecelendirme 0,00. Toplam oy 0.
 
Ürün YorumlarıTaksit